How to Install Motorized Roller Shades
Enhance your home's comfort and convenience by installing motorized roller shades. Follow these straightforward steps to ensure a successful installation:
Tools You’ll Need:
- Electric drill & screws (included)
- Screwdriver (Phillips or flathead)
- Tape measure & pencil
- Level (to ensure straight installation)
- Ladder (if needed)
Step 1: Measure and Mark
- Decide whether you want an inside mount (inside the window frame) or an outside mount (above the window frame).
- Use a measuring tape to measure the width and height of your window.
- Mark where the brackets will go using a pencil. Ensure they are level.
Step 2: Install the Brackets
- Hold the brackets in place where you marked.
- Use a drill to make pilot holes for the screws.
- Secure the brackets to the wall or window frame using the screws provided.
Step 3: Attach the Shade
- Align the roller shade with the brackets.
- Snap the shade into place.
- Make sure it is securely locked in.
Step 4: Final Adjustments
- Check if the shade rolls up and down smoothly.
- Adjust the limits (if needed) so it stops at the correct positions.
Please note: Please charge for 8 hours before use.
Installation Manuals
Motorized Roller Shades Installation Guide - VIDEO
Motorized Roller Shades Installation Guide - PDF
Remote Programming Guide - Bluetooth Battery-powered Motor - VIDEO
Remote Programming Guide - Alexa Battery-powered Motor - VIDEO
Remote Programming Guide - Matter Battery-powered Motor - VIDEO
Remote Programming Guide - Matter Battery-powered Motor - PDF
Remote Programming Guide - Zigbee Battery-powered Motor - VIDEO
Remote Programming Guide - Zigbee Battery-powered Motor - PDF
