How to Install Motorized Cellular Shades
Upgrade your home with our easy-to-install motorized cellular shades. Designed with simplicity in mind, these step-by-step instructions ensure a quick and hassle-free setup.
Tools You’ll Need:
- Drill & Drill Bits
- Screwdriver
- Measuring Tape
- Level
- Pencil
Step 1: Measure and Mark
- Decide whether you want an inside mount (inside the window frame) or an outside mount (above the window frame).
- Use a measuring tape to measure the width and height of your window.
- Mark where the brackets will go using a pencil. Ensure they are level.
Step 2: Install the Brackets
- Hold the brackets in place where you marked.
- Use a drill to make pilot holes for the screws.
- Secure the brackets to the wall or window frame using the screws provided.
Step 3: Attach the Shade
- Align the cellular shade with the brackets.
- Snap the shade into place.
- Make sure it is securely locked in.
Step 4: Final Adjustments
- Check if the shade rolls up and down smoothly.
- Adjust the limits (if needed) so it stops at the correct positions.
Please note: Please charge for 8 hours before use.
